End Effectors
End Effectors within Robotics & Automation.
Category CAT-000000050
Subcategories
Publications
- OT-2026-000057623
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057624
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000057625
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000057626
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057627
A zoned vacuum gripping tool comprising one mounting flange, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the set-do
- OT-2026-000057628
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000057629
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000057630
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000057631
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057632
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the set-do
- OT-2026-000057633
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000057634
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057635
A zoned vacuum gripping tool comprising one tool-change interface, two suction cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057636
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000057637
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000057638
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057639
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do
- OT-2026-000057640
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one plant vacuum connection, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the plant vacuum connection. After the workpiece has reached the
- OT-2026-000057641
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one ejector, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the ejector. Before the workpiece reaches the set-down pos
- OT-2026-000057642
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000057643
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057644
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie
- OT-2026-000057645
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiec
- OT-2026-000057646
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057647
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057648
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000057649
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the wo
- OT-2026-000057650
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057651
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do
- OT-2026-000057652
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000057653
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the wo
- OT-2026-000057654
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000057655
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057656
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie
- OT-2026-000057657
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the workpiec
- OT-2026-000057658
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057659
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057660
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000057661
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the wo
- OT-2026-000057662
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057663
A zoned vacuum gripping tool comprising one mounting flange, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-do
- OT-2026-000057664
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w
- OT-2026-000057665
A suction-cup vacuum gripping tool comprising one tool-change interface, one suction cup, one plant vacuum connection, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the plant vacuum connection. Before the wo
- OT-2026-000057666
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum circu
- OT-2026-000057667
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057668
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the workpie
- OT-2026-000057669
A suction-cup vacuum gripping tool comprising one mounting flange, one suction cup, one vacuum pump, one isolation valve, one pressure sensor, one contact detector and one vent valve. When the suction cup reaches the workpiece, the suction cup is evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000057670
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one vent valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the vacuum
- OT-2026-000057671
A zoned vacuum gripping tool comprising one tool-change interface, two bellows cups, one ejector, one manifold, two zone branches, one pressure sensor, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the
- OT-2026-000057672
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one vacuum pump, one isolation valve, one manifold and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. After the workpiece has reached the set-down position, the w