End Effectors
End Effectors within Robotics & Automation.
Category CAT-000000050
Subcategories
Publications
- OT-2026-000029496
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000029497
A suction-cup vacuum gripping tool comprising one mounting flange, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpiece re
- OT-2026-000029498
A foam-pad vacuum gripping tool comprising one mounting flange, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down position, the
- OT-2026-000029499
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000029500
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000029501
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000029502
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000029503
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000029504
A bellows-cup vacuum gripping tool comprising one mounting flange, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down p
- OT-2026-000029505
A suction-cup vacuum gripping tool comprising one tool-change interface, two suction cups, one vacuum pump, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the vacuum pump. Before the workpi
- OT-2026-000029506
A foam-pad vacuum gripping tool comprising one tool-change interface, four foam pads, one vacuum pump, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the vacuum pump. Before the workpiece reaches the set-down positio
- OT-2026-000029507
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000029508
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000029509
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000029510
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000029511
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000029512
A bellows-cup vacuum gripping tool comprising one tool-change interface, four bellows cups, one vacuum pump, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-
- OT-2026-000029513
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece re
- OT-2026-000029514
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000029515
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000029516
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000029517
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece re
- OT-2026-000029518
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000029519
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000029520
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000029521
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000029522
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000029523
A zoned vacuum gripping tool comprising one mounting flange, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the set-down
- OT-2026-000029524
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000029525
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece re
- OT-2026-000029526
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000029527
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000029528
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000029529
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece re
- OT-2026-000029530
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000029531
A zoned vacuum gripping tool comprising one tool-change interface, three bellows cups, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the vacuum pump. Before the workpiece reaches the se
- OT-2026-000029532
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000029533
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches
- OT-2026-000029534
A foam-pad vacuum gripping tool comprising one mounting flange, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the workpiec
- OT-2026-000029535
A zoned vacuum gripping tool comprising one mounting flange, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down position, th
- OT-2026-000029536
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000029537
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece re
- OT-2026-000029538
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000029539
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000029540
A bellows-cup vacuum gripping tool comprising one mounting flange, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down position,
- OT-2026-000029541
A suction-cup vacuum gripping tool comprising one tool-change interface, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece re
- OT-2026-000029542
A foam-pad vacuum gripping tool comprising one tool-change interface, six foam pads, one ejector, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the foam pads reach the workpiece, the foam pads are evacuated by the ejector. Before the workpiece reaches the set-down position, the wo
- OT-2026-000029543
A zoned vacuum gripping tool comprising one tool-change interface, one foam pad, one vacuum pump, one isolation valve, three zone branches, one contact detector and one blow-off valve. When the foam pad reaches the workpiece, the foam pad is evacuated by the vacuum pump. Before the workpiece reaches the set-down positi
- OT-2026-000029544
A bellows-cup vacuum gripping tool comprising one tool-change interface, six bellows cups, one ejector, one isolation valve, one manifold, one contact detector and one blow-off valve. When the bellows cups reach the workpiece, the bellows cups are evacuated by the ejector. Before the workpiece reaches the set-down posi
- OT-2026-000029545
A suction-cup vacuum gripping tool comprising one mounting flange, three suction cups, one ejector, one isolation valve, one manifold, one pressure sensor, one contact detector and one blow-off valve. When the suction cups reach the workpiece, the suction cups are evacuated by the ejector. Before the workpiece reaches